17 DEGREE FOLDING CONE COIN RING MAKING TOOLS
This is a cone used instead of the steel or plastic balls to start the folding process for making a coin into a ring. Works with the 20° dies but really works great with my 17° fold over dies.
One Universal Folding Reduction Die 1.3″ x 1.4″ @ 17 degrees
One Universal Folding/Reduction Die .9″ x 1.0″ @ 17 degrees – Coin
One Universal Folding Reduction Die 1.3″ x 1.4″ @ 17 degrees
These dies are made to do the Swedish Wrap Method. The inside angle is 7 degrees. Also with 4 different sized dies. Die 1 is approximately 1.4 at the top and 1.15 at the bottom. Die 2 is 1.3 at top and 1.05 at bottom. Die 3 is 1.2 at top and .95 at bottom. Die 4 is 1.1 at top and .85 at bottom. SW dies are 1-1/8 tall. These dies are hardened and the inside of the die is polished very smooth.
Coin Ring Making Tools, Swedish Die Wraps (4) with 9 Push Rods, Coin Ring Die Set, Swedish Wrap Method
Coin Ring Tools Stainless Steel Starter Cone for folding and reducing coins into rings using folding dies. Stainless steel folding cone machined from
Coin Ring Tools Starter Large Size Folding Cone
Coin Making Tool 17 Degree Folding Die Set 5 Pieces Reduction
Six piece (5 dies and 1 folding cone) coin ring reduction and folding die set machined from heat treated and hardened 17-4 stainless steel. stainless
17 Degree Folding Die Set 5 Pieces Reduction/Folding Die Set + Folding Cone, Stainless Steel Coin Making Tool Made in The USA
Legacy Brand Coin Ring Tools:, Coin Ring reduction and folding die machined from heat treated and hardened 17-4 stainless steel. No more worrying
17 DEGREE Folding Die (0.70 x 0.80) for making coin rings Stainless Steel
Other Metalworking Supplies из Америки — Купить на с
17 degree Double side coin ring universalreduction die. Self-centering1/2 coin punche r for any coin from 20 mm (0.78) to 38.1 mm (1.5);. Steel
COIN RING Tool Set 1/2 self-centering punch, 17 degree folding cone, 2 dies
This is a spacer you can use with your SW (Swedish Wrap) dies or punch kits to raise them up so when you push the coin ring all the way thru the die
SUPPORTO PUNZONE CENTRO STAMPO SVEDESE (SW) PER STRUMENTI PER FARE ANELLI MONETE
17 degree steel folding cone. Size: from 0.25 to 1.3;. 17 degree caprolon folding cone. 17 Degree universal folding set. double side coin ring
17 Degree Folding SET cone dies coin ring tool fold over quarter made in Ukraine
ring making tools products for sale
