Allfuelhst Wall Thimble for 8 inch Diameter Chimney Pipe

The Wall Thimble is used for through-the-wall chimney installations. It protects the wall as the chimney passes safely through to the outside, and provides a finished look to the framed opening on the inside. The Wall Thimble can adjust to accommodate walls from 6 in. to 10 in. thick.

AllFuel HST 11-Inch Square Ceiling Support Box for 8-Inch Inner Diameter Chimney Pipe

The roof support bracket is used for A-frame and cathedral ceiling homes where a Ceiling Support Box is not desired or required. The roof support mounts to the framing and can support a total of 45 feet of chimney with a maximum of 20 feet below the support. An Extended Roof Brace (sold separately) is often used in conjunction with a Roof Support to provide lateral stability above the roof. Age.

AllFuel HST Roof Support for 6 inch Double Wall Chimney Pipe

The Anchor Plate is used to mount All-Fuel Chimney to a masonry fireplace or directly to an appropriate appliance. Only Compatible with ComfortBilt USA Products UL 103HT certified 304 stainless steel Age.

AllFuel HST Anchor Plate for 8-Inch Inner Diameter Chimney Pipe

Does anyone recognize the manufacturer of this chimney pipe? 8

Our Roof Support Kit contains all the elements necessary to affix single wall stove pipe to double wall Class-A chimney and vent it through a single-story A-Frame or cathedral roof home without needing a Support Box. The roof support mounts to the frame and holds up to 45 feet of chimney, where a maximum of 20 feet is comprised of Class-A pipes. Additionally, you can view installation instructions separately.

Roof Support Kit for 8 Inner Diameter Chimney Pipe

AllFuel HST Tee With Clean Out Cap for 8 Diameter 304 Stainless

Through The Wall Kit for 8 Inner Diameter Chimney Pipe – AllFuel HST

The 30° Elbow Kit is used to get past rafters or away from an obstruction like plumbing, HVAC, or the roof peak. Up to 2 lengths of chimney pipe (for a maximum run of 72 in. between elbows) can be added between elbows to allow for necessary spacing. An Elbow Strap is included and helps support the weight of the offset from the elbows. If your installation includes two lengths of pipe between the elbows a second Elbow Strap (sold separately) is required. Inner wall 0.019 in.

AllFuel HST 30 Degree Elbow Kit for 6-Inch Inner Diameter Chimney Pipe

The wall thimble is used for thru-the-wall chimney installations. It protects the wall as the chimney passes safely through to the outside and provides a finished look to the framed opening. The wall thimble can adjust to accommodate walls from 6 to 10 thick. For thicker walls a field fabricated extension tube can be installed. The wall thimble is used together with the tee tee support and a short pipe section to penetrate the wall with you Shasta Vent double wall chimney.

Shasta Vent 6 inch Wall Thimble 6A-WT

AllFuel HST 8 x 48 304 Stainless Steel All Fuel Class-A Double

How to Install a Wall Thimble and Stove Pipe

Roof Support Kit for 6 Inner Diameter Chimney Pipe – Dominusheat

AllFuelHST Wall Thimble for 8 Diameter Chimney Pipe

15 Degree Elbow Kit for 6 Inner Diameter Chimney Pipe – AllFuel HST