Blackburn Marine - Salts Gone Fishing Wipes

 

The 1-2 punch is now here!

1. Stop existing rust in its tracks with our easy to use Industrial Rust Converter.

2. Prevent future corrosion from salt with Salts Gone™.

A little product goes a long way. A Gallon  will do over 600 square feet of application. 

 

To Use:

1. Thoroughly rinse area to be treated with Salts Gone™ to remove any salt from surface.

2. Wire wheel or otherwise remove all loose rust from surface.

3. Blow surface clean to remove any dust.

4. Shake Rust Converter bottle well to mix.

5. Pour amount needed in a separate container (DO NOT use directly out of this package as contamination will occur resulting in product hardening).

6. Brush, roll or spray Rust Converter on area to be treated. Thoroughly work it into surface in a circular motion. Deeply penetrate all areas of active corrosion.

7. Converter will turn from white to black in areas affected by rust.

8. If areas are missed with first application, wait 30 minutes before re-coating over the same area.

9. Product will dry within 30 minutes.

10. Product will fully cure in 24 hours.

11. If a topcoat is desired, apply after product is fully cured.

Blackburn Marine

Volume III, Appendices EM - National Marine Fisheries Service

2 Pack Wipes - Salts Gone™ and Fishing Wipes

removes blood, guts and stink from your hands and boat

Salts Gone Fishing Wipes

Dead Down Wind Fishing Angler Wipes, 40 Count

Gulf Islands South Fishing Report - Island Fisherman Magazine

Salts Gone Heavy Duty Wipes

Salts Gone Dealer Locator – Salts Gone™

2 Pack Wipes - Salts Gone™ and Fishing Wipes

removes blood, guts and stink from your hands and boat

Salts Gone Fishing Wipes

Local Women's Volunteer Organization Holds Month-Long Diaper Drive

Cleaning Wipes - Dapple Baby

2 Pack Wipes - Salts Gone™ and Fishing Wipes