Delft Clay Casting Sand & Mold Frames

The Delft Clay Method is a highly refined form of sand casting that substitutes genuine Delft Clay from Holland for ordinary casting sand. The process

INSTRUCTIONS: Delft Clay mold is created in these steps: 1. Fill and compact the Clay into one half of the aluminum ring frame 2. Remove excess clay with a straight edge (e.g. a flexible steel ruler) 3. Press your original pattern halfway into the clay. 4. Brush Mica Powder or talcum powder over this surface of the mold 5. Install the other half of the aluminum ring frame, fill it with clay, and compact 6. Open the ring frame and remove the pattern 7. Carve out a pouring channel and vents 8.

Delft Clay Casting Sand Kit Gold Silver Pewter Aluminum -Set Includes Ring & DVD

290 idées de Alex outils fabrication bijoux, brico déco, outils de bijouterie

Cast Iron 2-Part Flask Mold Fit for Delft Sand Casting Jewelry Making Tool - AliExpress

Two-Piece Aluminum 100 MM Round Mold Frame Set for Petrobond Sand Casting Clay, CAST-0036

Delft Clay Casting Kit — Otto Frei

for fly press Jewelry making tutorials, Jewelry form, Metalsmithing jewelry

Delft clay casting - making the mold part 1 This process takes so long, Clay

JTS Mold Rings for Delft Clay Sand Casting 100 mm Aluminum 2 Part Ring Mold Frame

290 idées de Alex outils fabrication bijoux, brico déco, outils de bijouterie

Sand Casting Jewelry Delft Clay

upload.wikimedia.org/wikipedia/commons/3/3c/SandMo

100 mm Aluminum Flask for Delft Clay and Sand Casting

Original Delft Clay & Casting Frame Cast Iron Mold Sand Flask Set for Casting - Denmark

Lost Wax Casting Machines & Crucibles

🟢 Delft Clay Casting Sand 2 Kilo Bag (4.4 Lbs.) 🟢 JETS Product # 0305-3002 and 0305-200 🔻More information on product description🔻

Original Delft Clay & Casting Frame Cast Iron Mold Sand Flask Set for Casting by JTS