Duratec Clear High Gloss Additive can be blended with numerous gel coats to create a glossy, smooth finished surface. Mix at a 1:1 ratio with regular gel coat to reduce viscosity and porosity, improve gloss level, and permit a complete open-air cure. It can also be blended at 15% with tooling gel coats to upgrade mold surfaces, improve gloss retention, increase impact resistance, and reduce heat distortion.
, Sold in Gallons, Add to gelcoat at a 1:1 ratio to make an easily sprayed coating that can be sprayed through most paint guns. Provides a high
Duratec Clear Hi-Gloss Additive
904-001 Duratec Clear Hi-Gloss Additive for Gelcoat (Gallon
904-001 Duratec Clear Hi-Gloss Additive for Gelcoat (Gallon
Blend with gelcoat to create a repair coating or to improve the initial properties of the gelcoat. A 50:50 blend with gelcoat will air-cure, even at the thin edge of a repair. Makes gelcoat spray like paint Contains special additives to prevent UV-induced yellowing and gloss loss. Reduce Porosity in tooling gelcoat. Improves air release thus preventing porosity. You'll get a superior finish, add quality and save time and labor with Duratec Polyester Hi-Gloss Additive.
904-001 Duratec Clear Hi-Gloss Additive for Gelcoat (Gallon)
Duratec Clear Hi-Gloss Gel Coat Additive-in stock - Fibre Glast
Gel-coat Products
Blend with gelcoat to create a repair coating or to improve the initial properties of the gelcoat. A 50:50 blend with gelcoat will air-cure, even at the thin edge of a repair. Makes gelcoat spray like paint Contains special additives to prevent UV-induced yellowing and gloss loss. Reduce Porosity in tooling gelcoat. Improves air release thus preventing porosity. You'll get a superior finish, add quality and save time and labor with Duratec Polyester Hi-Gloss Additive.
904-001 Duratec Clear Hi-Gloss Additive for Gelcoat (Gallon)
904-001 Duratec Clear Hi-Gloss Additive for Gelcoat (Quart)
CASE OF 4 Duratec Clear Hi-Gloss Additive (4 Gallons Total) 904