Envirotex Lite - The Compleat Sculptor

EnviroTex Lite® is a water clear 1:1 mix ration by volume epoxy resin used to coat surfaces. It cures to a long-lasting, high gloss coating in approximately 8 hours at 70°F, and reaches full strength and toughness in about 72 hours.

Put a high-gloss, waterproof finish on your projects for a striking, lustrous effect. This unique formula is a reactive polymer compound specially

EnviroTex Lite® Pour-On High Gloss Finish

Envirotex Lite Pour-On 8 oz. High Gloss Finish

Resin on Polymer Clay – Polymer Clay Journey

Envirotex Lite Pour on High Gloss Finish 64 Ounce Kit

EnviroTex Lite

Envirotex Lite Kit Epoxy Resin High Gloss (Gallon, 128 oz.)

Envirotex Lite Kit Epoxy Resin High Gloss (Gallon, 128 oz.)

Feather Lite™ - The Compleat Sculptor

Envirotex Lite Pour-On High Gloss Finish 32 oz. Kit

Epoxy Resin - The Compleat Sculptor

Envirotex Lite Pour-On 8 oz. High Gloss Finish

Epoxy Resin - The Compleat Sculptor

One thick coat equals up to 50 coats of varnish. Cures to a thick glossy coating in about 8 hours at 70°F and reaches full strength and toughness in about 48 hours. This durable, resilient material requires no polishing to produce a high gloss. One coat is all that is usually required for deep attractive finish; however, two or more coats may be applied one over the other by simply wiping the surface with a clean cloth and alcohol prior to recoating. Covers 32 sq. ft. per gallon.

Envirotex Lite Pour-On 16 oz. High Gloss Finish

The Compleat Sculptor - The Compleat Sculptor

EnviroTex Lite