8x8x3 Silicone Mold For Epoxy Resin - Deep Casting Mold – Crafted Elements
Interior Size: 8x8x3" Fluid Volume: 106oz / 3147ml Wall Thickness: 5/8" Material: Platinum Cure Silicone - Shore 30A Interior Finish: Polished / Shiny This 8x8x3" block mold is perfect for casting items such as flowers, rocks, and other memorabilia into resin up to 3" thick. It's an ideal size for resin encased models
| Interior Size: | 8x8x3 |
| Fluid Volume: |
106oz / 3147ml |
| Wall Thickness: | 5/8 |
| Material: | Platinum Cure Silicone - Shore 30A |
| Interior Finish: | Polished / Shiny |
This 8x8x3 block mold is perfect for casting items such as flowers, rocks, and other memorabilia into resin up to 3 thick. It's an ideal size for resin encased models and sculptures.
The 3 depth and 8x8 footprint of this silicone mold also makes it ideal for making resin and wood blanks for wood turning to create resin and wood bowls.
This is a popular mold for creating small resin table lamps (turning the cast piece on its side to create an 8 wide x 8 tall and 3 front to back piece). Simply install an LED light on the bottom of your casting and up-light it from below. Works great with LED puck lights, and thin battery powered light strands.
Note that due to the stiffness of the silicone, demolding a piece of this height can be challenging. There are two ways to remove castings from this mold as peeling back the mold significantly will likely result in tearing.
1. Pouring distilled water between the cured resin piece and the interior wall of the mold and moving the water around the resin casting before trying to attempt to remove it from the mold.
2. Using a compressed air hose with a soft (plastic or rubber) gun nozzle end. Insert your air gun in between the casting and the mold wall and scale up the air flow rate until the casting rises from the mold.
Crafted Elements - Big Silicone Molds, Router Templates & Router Sleds
8x8x3 Silicone Mold for Epoxy Resin Block Mold
〠Large Hexagon Resin Molds】You can use your creativity to make hexagonal ornaments of any thickness. The unique finished product is perfect for
Large Silicone Molds for Resin,Resin Hexagon Molds 7'' x 2'', Deep Epoxy Resin Molds for Flowers Preservation,Resin Art, Resin Casting, DIY
Crafted Elements - Big Silicone Molds, Router Templates & Router Sleds
Specialty Shape Molds - Silicone Molds For Epoxy Resin – Crafted Elements
8x8x2 Deep Tray Silicone Mold For Epoxy Resin - 1 Deep Dish Mold – Crafted Elements
Interior Size:, 8x3, Fluid Volume:, 83oz / 2458ml, Wall Thickness:, 5/8, Material:, Platinum Cure Silicone - Shore 30A, Interior Finish:, Polished /
8x3 Cylinder Silicone Mold For Epoxy Resin - Woodturning & Deep Casting Mold
8x8x3 Inches Deep Casting Silicone Mold
Specialty Shape Molds - Silicone Molds For Epoxy Resin – Crafted Elements
229pcs Silicone Resin Molds Kit, TSV Silicone Epoxy Casting Molds Tools Set for DIY Jewelry Craft Making, Necklace Earring Diamonds Bear Epoxy Resin Making Kit for Resin Casting Beginner
Specialty Shape Molds - Silicone Molds For Epoxy Resin – Crafted Elements
8x8x3 Silicone Mold For Epoxy Resin - Deep Casting Mold – Crafted Elements
10x10x3 Silicone Mold For Epoxy Resin - Deep Casting Mold – Crafted Elements
Specialty Shape Molds - Silicone Molds For Epoxy Resin – Crafted Elements
