NEIKO 02604A Hole Punch Set SAE & Metric, 3/16” – 1-3/8” & 5

GASKET PUNCH SET: 13 Interchangeable round hollow punches are sharp, heat treated carbon steel punches cut clean and accurate to create washers or gaskets. All in one punch can be used on rubber, leather, vinyl, carpet, plastic, cardboard, copper, soft brass, and many more materials. CENTER PUNCH: Handle includes built in spring loaded center punch with pilot tip for accurate positioning. Center punch can be removed for making solid disc cutouts just like a circle punch, gasket cutting kit, carpet hole punch, foam hole punch or circle cutter. SINGLE HOLE PUNCH: Interchangeable punch heads have a knurled surface to easily screw securely into the six inch long steel handle for safe and easy handling when punching out holes, working with your grommet tool kit, or using as a belt hole puncher. DUOMETRIC SIZES: 13 bits that cover 26 metric and
GASKET PUNCH SET: 13 Interchangeable round hollow punches are sharp, heat treated carbon steel punches cut clean and accurate to create washers or gaskets. All in one punch can be used on rubber, leather, vinyl, carpet, plastic, cardboard, copper, soft brass, and many more materials. CENTER PUNCH: Handle includes built in spring loaded center punch with pilot tip for accurate positioning. Center punch can be removed for making solid disc cutouts just like a circle punch, gasket cutting kit, carpet hole punch, foam hole punch or circle cutter. SINGLE HOLE PUNCH: Interchangeable punch heads have a knurled surface to easily screw securely into the six inch long steel handle for safe and easy handling when punching out holes, working with your grommet tool kit, or using as a belt hole puncher. DUOMETRIC SIZES: 13 bits that cover 26 metric and standard sizes in total, ranging from small hole punches like 3/16 inch (5 millimeter) to large hole punches like 1-3/8” (35mm) all conveniently stored with the punch handle in a organizing carrying case. INCLUDED SIZES: 3/16 (5mm), 1/4 (6mm), 5/16 (8mm), 3/8 (10mm), 7/16 (11mm), 1/2 (13mm), 5/8 (16mm), 3/4 (19mm), 7/8 (22mm), 1 (25mm), 1-1/8 (28mm), 1-1/4 (32mm), and 1-3/8 (35mm) Tips:1.1. Best results are achieved when using on a flat and even surface. Preferably use with a wooden or plastic surface under cutting material as metal or other heavy surfaces may damage the hole punch.2.2. Remove the spring-loaded centering pin for cutting out circles without damaging the disc cut out. To remove the center punch, unscrew the top bolt of the punch handle, remove the rubber grip, and loosen the allen screw to remove the center punch.Operating Instructions:1. Mark the center of the hole to be punched out.2. Choose the appropriate hole punch and screw it on the punch handle.3. Apply the spring loaded centering pin at the marked center.Note: The spring loaded centering pin can be removed to cut full circles and/or to avoid damaging the disc cut out.4. Hold the punch handle vertically to the work piece.5. Hit the top of the punch handle with a hammer.Note: Hitting to hard may damage your hole punch while hitting the softly may not create a proper hole in your work piece.

NEIKO 02639A 6-Inch Automatic Center Hole Punch with Adjustable One-Ha – NEIKO®

NEIKO 02432A 3/8” Drive SAE and Metric Impact Socket Set, 21 Shallow Pieces, SAE 5/16” to 3/4”, 7mm to 19mm, Premium Cr-V Steel, 6-Point Hex Design

Mayhew Pro 66002 1/8-Inch to 2-Inch Imperial SAE Hollow Punch Set : : DIY & Tools

Hollow punch is used to create precise gaskets and washers in softer materials; eg cloth, vinyl, leather, light sheet metaland gasket material

Mayhew Pro 66004 3 mm to 30 mm Metric Hollow Punch Set

Hollow punch is used to create precise gaskets and washers in softer materials; eg cloth, vinyl, leather, light sheet metaland gasket material

Mayhew Pro 66006 3 mm to 50 mm Metric Hollow Punch Set

Hollow Hole Punch Set 14 Pieces 3/16 to 1-3/8in – Hole Maker Tool Gasket Punch Set 5 to 35mm – Hollow Punch Set with 13 Different Sizes : Tools & Home Improvement

3/16 英寸扳手套装

GASKET PUNCH SET: 13 Interchangeable round hollow punches are sharp, heat treated carbon steel punches cut clean and accurate to create washers or

NEIKO 02604A Hole Punch Set | SAE & Metric, 3/16” – 1-3/8” & 5 – 35mm | 14 Piece Sharp Hollow Hole Punch Kit, Gasket Cutting Puncher, Foam Cutter,

Professional Super Sharp Hollow Punch Set Make clean, precise holes in Leather, Copper, Plastic, Rubber and Cork. 13 interchangeable punch tips let you choose different size holes from 3/16 to 1-3/8. Punch accurate washers and gaskets. This punch kit comprises of a single handle, onto which screws a series of single interchangeable punches.

13 Sharp Hollow Punch Tool Set Leather Kit Gasket Hole

36 PC Hollow Punch Set, Mayhew 66016

Mayhew Tools 66016-MAI 045256660165, Multi, 1/8-Inch to 2-3/8-Inch 36 piece : Everything Else

Professional-grade quality, these pieces are forged with a base of special alloy steel that produces incredible strength without brittleness. A titanium-brazed coating ensures sharpness lasts up to twenty times longer than steel. Set includes the 20 most commonly-used tap-and-die Metric sizes, T-handle tap wrench, die adapter and set screw driver, die-stock handle wrench, adjustable tap handle wrench, die size-adapter and screw driver.

Neiko Steel Alloy 76-Piece Tap & Hexagon Die Set