Microscale MI-1: Decal products Microset decal liquid Blue bottle 1 x 30ml (ref. MI-1)

Microset is a decals liquid that enormously helps you during their application. It softens the decals, allowing you to place them over irregular surfaces, and at the same time improves their integration with the paint. The product must be applied with a soft brush, placing a few drops between the decal and the surface of the kit. Once dried enough, so the decal can't be easily moved, apply a little bit of Microsol (ref. MI-2) with a small flat brush over the decal to let it finally mould over the surface. Let it dry for almost 12 hours before coating or handling your kit. With these simple instructions, you'll get a perfect finish. Additional details for the Microset decal liquid - Blue bottle decal products: Manufactured by Microscale with reference MI-1 (also listed as 710208001012). Package measures 50 mm x 95 mm x 50 mm (width x depth x height), weighting 50 g.Box barcode 710208001012 (GTIN/EAN)Product contains 1 x 30ml. Shipping restrictions may apply to certain countries (more info at our FAQ)
Microset is a decals liquid that enormously helps you during their application. It softens the decals, allowing you to place them over irregular surfaces, and at the same time improves their integration with the paint. The product must be applied with a soft brush, placing a few drops between the decal and the surface of the kit. Once dried enough, so the decal can't be easily moved, apply a little bit of Microsol (ref. MI-2) with a small flat brush over the decal to let it finally mould over the surface. Let it dry for almost 12 hours before coating or handling your kit. With these simple instructions, you'll get a perfect finish. Additional details for the Microset decal liquid - Blue bottle decal products: Manufactured by Microscale with reference MI-1 (also listed as 710208001012). Package measures 50 mm x 95 mm x 50 mm (width x depth x height), weighting 50 g. Box barcode 710208001012 (GTIN/EAN) Product contains 1 x 30ml. Shipping restrictions may apply to certain countries (more info at our FAQ)

Includes One 1oz bottle of each solution - 3 bottles totalMicro Set prepares the surface and enhances the adhesive properties.Micro Sol completely

Microscale Micro Set, Micro Sol, and Liquid Decal Film, One 1 Ounce Bottle of Each with Spice of Life Paintbrush Set

Series Españolas: Marking / livery 1/32 scale - Bell AH-1G COBRA G - Base Naval de Rota (ES0) - Rota Naval Station 1972 - water slide decals and placement instructions - for

A new genius by Tamiya: a fantastic product that will help you avoid the effect of the brightness of the film supporting the decals, known as

Decal Adhesive Softener Type - 1 x 10ml. Decal products manufactured by Tamiya (ref. TAM87193, also 4950344871933 and 87193)

Mirco Sol setting solution is for the most difficult irregular surfaces to be found on models. The most amazing results in seemingly impossible places

Microscale Micro Set/Micro Sol Decal Setting Solution Set MI-1/MI-2 - US

Series Españolas: Marking / livery 1/72 scale - Lockheed F-104 Starfighter G - Fuerza Aérea Española (ES0) - Torrejon Air Base - water slide decals and assembly instructions - for all kits (ref. SE2372), Markings > 1/72 scale

Microsol is a decals liquid that enormously helps you improve their application. Must be applied with a soft brush over the decal once it is right on

Microsol decal liquid - Red bottle - 1 x 30ml. Decal products manufactured by Microscale (ref. MI-2, also 710208001029)

Liquid Decal Film Every modeler and decal-user should have Micro Liquid Decal Film on hand, especially if you have been modeling for some time. The typical decal scrap box is not the best place to store the decals. Exposure to air, sunlight, moisture, great swings in temperature/humidity, or general abuse can cause decals can go bad. Restore old decals by coating them with MI-12 Liquid Decal Film before wetting. Use Isopropyl Alcohol to clean or thin.

Microscale Industries Micro Liquid Decal Film 1 oz

MicroSet Decal Solution

Quinta Studio 1/72 F-4E early/EJ decal (Finemolds kit)

Includes One 1oz bottle of each solution - 2 bottles total Micro Set prepares the surface and enhances the adhesive properties. Micro Sol completely softens the decals in order for them to conform perfectly to any irregular surface.

Microscale Industries, Inc. Micro Set, Micro Sol, Micro Mask, Micro Kristal Klear, 1 oz. Bottles, One of Each with Make Your Day Paintbrush Set

Micro Sol Microscale BMF128 Setting Solution MSSOL : Toys & Games

Tamiya: Decal products - Mark Fit Super Strong - 1 x 40ml - 40 ml jar (ref. TAM87205), Paints and Tools > Decal softener

Microscale Decals: Micro Coat Flat - 1 oz. bottle (Clear Flat finish)

Tamiya 87102: Decal products Mark Fit Decal Solution 1 x 40ml (ref. TAM87102)