Replacement Tip, Small Diamond Bead Reamer – Beaducation

Replacement head for the Diamond Bead Reamer. Can also be held in a pin vise or Dremel for reaming. Use with cutting lubricant to make reaming easier.Total length on this bit is 2". The diamond coated section is 7/8th" and it tapers from 2mm thick to .5mm thick.

Replacement head for the Diamond Bead Reamer. Can also be held in a pin vise or Dremel for reaming. Use with cutting lubricant to make reaming easier.

Total length on this bit is 2. The diamond coated section is 7/8th and it tapers from 2mm thick to .5mm thick.

Replacement head for the Diamond Bead Reamer. Can also be held in a pin vise or Dremel for reaming. Use with cutting lubricant to make reaming easier.Total length on this bit is 2. The diamond coated section is 7/8th and it tapers from 2mm thick to .5mm thick.

bead reamers

All products – Beaducation

BEAD REAMERS: These bead reamers are used to enlarge a hole in a bead, and to smooth the edges of the drill hole. The files are made from steel and

The Beadsmith Deluxe Diamond Coated Bead Reamer w/ 3 Interchangeable Tips & Aluminum Storage Handle, for Opening & Enlarging Holes & Smoothing Edges

Replacement head for the Diamond Bead Reamer. Can also be held in a pin vise or Dremel for reaming. Use with cutting lubricant to make reaming

Replacement Tip, Small Diamond Bead Reamer

10pcs of higher quality of rotary file set for rotary tools Shank Diameter: 1/8, Length: 2” Tapered Diamond Coated Tip For use with Dremel Type

COLIBYOU 10pc Diamond Bead Reamer Bit Set Fine Tip for Dremel Rotary Lapidary Jewelry

Three tools in one. Enlarge, de-burr, or round out bead holes. Three different tips are included, fitting bead holes from the smallest up to 5.0mm. Each tip is coated with diamond dust for smooth, even reaming. Tips store conveniently inside the tool and attach to the top for use. Handy spring clip makes it easy to carry.

Beadsmith Diamond-Tip Bead Reamer Set

SE DF83510 2 tapered diamond bead Reamer with diamond coated tip - 10 pieces can be used for Jewelers, lapidary, hobbies and crafts, modeling, home

SE DF83510 Tapered Diamond Bead Reamer with Diamond Coated Tip (10 Piece), 2

This is a new se; 10pc 1/16 x

COLIBROX 10pc 2 Diamond Bead Reamer Set 1/16 x 7/8 for Dremel Rotary Tool 1/8

Diamond Bead Reamer Set Jewelry Making Tools – Beaducation

BEAD REAMERS: These bead reamers are used to enlarge a hole in a bead, and to smooth the edges of the drill hole. The files are made from steel and

The Beadsmith Replacement Reamer Tip – Made of Steel – Diamond Coated – 3 Inches with a 2.3mm Tip for Opening and Enlarging Bead Holes – Use on Glass

Often a hole in a bead, pearl, shell, or gem is too small, is not straight, or the two holes in some hand-drilled beads may not quite meet. The

The Beadsmith Deluxe Diamond Coated Bead Reamer w/ 3 Interchangeable Tips & Aluminum Storage Handle, for Opening & Enlarging Holes & Smoothing Edges

BEAD REAMERS: These bead reamers are used to enlarge a hole in a bead, and to smooth the edges of the drill hole. The files are made from steel and

The Beadsmith Bead Reamer Set – 3 Interchangeable Diamond Coated Tips – Anodized Aluminum Hollow Handle for Storage – Tools for Opening & Enlarging

BEAD REAMERS: This compact, lightweight reamer is an electric tool with speeds varying from 1000 – 18000 rmp, 24-volt DC. The files are made from

The Beadsmith Electrical Bead Reamer – 3 Interchangeable Diamond Coated Tips – 24 Volt DC – Variable Speed Control – Tools for Opening & Enlarging