System Three G-2 Epoxy Glue Kit, 12 oz.

For over 35 years, G-2 has been an excellent epoxy adhesive choice for oily, acidic hardwoods like teak and other tropical woods. Use it for gluing oak and cedar, as well as other materials that are difficult to bond. G-2 was developed primarily for waterproof bonding of rot-resistant woods used in fine yacht joinery. Use G-2 for both interior and exterior applications as well as below the waterline. G-2 can be mixed in small or large batches, has a long pot life and cures overnight.

T-88 is a high-performance, non-brittle, two-part epoxy adhesive designed to give superior results under adverse conditions. The adhesive may be used without modifications in normally fitted joints, and will cure in any thickness without shrinkage. T-88 is clear amber and becomes virtually invisible when varnished. T-88 exhibits outstanding adhesion and permanence on a wide variety of materials, and is endorsed by leading designers, builders and organizations.

System Three 1100K10 Amber T-88 Kit 0.5 Pint Bottle

Simpson SET-3G is a high-strength epoxy adhesive that's been formulated for anchoring threaded rod and rebar doweling in cracked and uncracked concrete. The new SET-3G epoxy has a higher temperature range than previous SET epoxies for better performance and consistency. The SET3G56 comes with 56 oz. side-by-side cartridge and works with EDTA56P pneumatic epoxy adhesive dispensing tool. The EMN22i mixing nozzle is sold separately.

Simpson Strong-Tie SET3G56 56-oz. High-Strength Epoxy Adhesive

SilverTip Resin & Hardener Kits - Duckworks Boat Builders Supply

General Purpose Resin is a versatile, all-around epoxy resin system used in both marine and woodworking applications. Three different hardeners offer

General Purpose Epoxy

T-88 Structural Epoxy Adhesive - System Three Resins

0.2 Oz. Single Use Quick Setting Epoxy Adhesive

Simpson Strong-Tie SET-3G High-Strength Epoxy Adhesive w/Nozzle 8.5oz

Epoxies SPI Supplies

System Three General Purpose Resin is the workhorse of the System Three product line. Fits well into over 90% of all epoxy applications. General Purpose Epoxy has excellent pot life and cure-time control. When selecting a hardener consider the minimum temperature expected during application and the required pot life. Combine different System Three General Purpose Epoxy Hardeners to provide a continuous range of cure times. Refer to the Epoxy Book to make a proper selection.

System Three Epoxy Resin 1 Gallon

For over 35 years, G-2 has been an excellent epoxy adhesive choice for oily, acidic hardwoods like teak and other tropical woods. Use it for gluing oak and cedar, as well as other materials that are difficult to bond. G-2 was developed primarily for waterproof bonding of rot-resistant woods used in fine yacht joinery. Use G-2 for both interior and exterior applications as well as below the waterline. G-2 can be mixed in small or large batches, has a long pot life and cures overnight.

System Three G-2 Epoxy Glue Kit, 12 oz.

Simpson 8.5 oz SET-XP10 Structural Epoxy-Tie Anchoring Adhesive for Cracked and Uncracked Concrete

G-2 Epoxy Glue — Coast Fiber Tek

Simpson Strong-Tie SET-3G10 High-Strength Epoxy Adhesive - 8.5oz Tube w/ Nozzle