STL file Magnetic Ball Stretcher Rings 🧲・Template to download and 3D print・Cults

These are a set of ball testicle scrotal stretchers. 15mm in height. Stronger magnets! Other designs out there use weaker magnets, which lead to the halves separating under tension, resulting in pinched testicles. These are made to fit bigger and stronger magnets for a more secure all day wear. Safer! Lets be honest! Wearing testicle stretchers all day is fun. Wearing them to work or out in public is even more fun. But emergencies can happen to us all. Sometimes you just need to get out of those stretches fast! Blue balls is not always fun. Neither is scrotal injury. Many other designs rely on hinges or screws for connection. With these you are stuck until you can get to a safe place and get out those tools. With magnetic stretchers you need not worry. These may be strong and secure, but its still just a discrete hand movement and your free - instantly. Nobody will even notice. I've included sizes ranging from 30-50mm inner diameter. This should fit most. If you are unsure which is the size for you then the most common sizes are 34 or 36mm. Start with one of those and try wearing it for some time, then adjust size accordingly. You should be able to fit a finger in between when the scrotal sack is relaxed. If not go up in size. When you have the correct size it should be comfortable and barely noticeable to wear. You will need 4 pieces of 10x5mm strong magnets. These are easily available from your favorite or aliexpress seller :) Attach the magnets with super glue (CA glue). Note! Take care with the polarity when attaching the magnets so that they don't repel each other. I recommend going over the edges with a bit of sand paper as the printing process may create some sharp edges which would not be compatible with sensitive testicle skin :) Warning! Be very careful when joining the two halves as the magnets are very strong and you don't want to get that sensitive skin pinched between.

Bondage Ball Stretcher, Magnetic Ball Weights, Testicle Stretcher (Sta – Clawfoot Productions

▷ ball stretcher male 3d models 【 STLFinder 】

3D MODEL DESCRIPTION, A ball stretchers designed to be locked on using simple nuts and bolts., You will need 2 x 40mm x 3.5mm round head bolts, 2 x

Super Comfy Ball Stretcher v2

stretcher 3D Models to Print - yeggi

Magnetic Ball Stretcher Rings (14mm to 56mm)

ball stretcher 3D Models to Print - yeggi

▷ cbt ball stretcher 3d models 【 STLFinder 】

STL file Magnetic Ball Stretcher Rings 🧲・Template to download and 3D print ・Cults

cbt ball stretcher 3D Models to Print - yeggi - page 4

STL file Bearing 608 (without balls) 🔧・3D printable model to download・Cults

These are a set of ball testicle scrotal stretchers. 15mm in height., Stronger magnets! Other designs out there use weaker magnets, which lead to the

Magnetic Ball Stretcher Rings

Stainless Steel Magnetic Ball Stretcher A339