Tool Grip and Tether Attachment Point

The Tool Grip and Tether Attachment Point installs onto screwdrivers and nut drivers to create a retrofit attachment point for tethering tools up to 1lb // 0.45kg, preventing dropped or falling objects from occurring on the job.

The Squids 3745 Tool Grip and Tether Attachment Point (2-pack) installs onto screwdrivers and nut drivers to create a retrofit attachment point for tethering tools up to 1lb // 0.45kg, preventing dropped or falling objects from occurring on the job. Connection points for tool lanyards can be tricky to find, especially on smaller hand tools like screwdrivers and nut drivers. While working at heights, it is important to tether tools as part of your overall fall protection plan, but the lack of these connection points can make that difficult.</p>

STRAIGHTFORWARD INSTALLATION</h3>

Designed in two pieces, this tool attachment features an end cap and a rubber sleeve. To install, slide a screwdriver or nut driver into the rubber sleeve and plug the end cap’s pegs into the reinforced holes of the rubber sleeve. The sleeve features a textured rubber and is ergonomically designed to cover the entire tool handle—providing greater comfort, torque and an enhanced grip. The end cap features a swiveling connection point for tool tethering, which helps prevent tangles and binding when used with a tool lanyard.</p>

Built-in trim lines on the sleeve allows for this tool attachment to be customized to fit varying driver lengths. A flexible opening on the bottom of the rubber sleeve expands to allow for larger nut drivers to be installed. Unlike competition, this tool attachment grip can be installed, removed and re-installed multiple times. The swiveling tool attachment portion does not interfere with proper holstering or prevent a user from pressing down on the end of the tool to gain leverage when using.</p>

TESTED TO BE TRUSTED</h3>

These tool tether attachments are built to withstand defined weight limits and can easily be used by any worker to help avoid accidentally dropping objects that could cause damage, injuries or possibly death. These attachments are third-party certified to 1lb // 0.45kg maximum capacity and meet the ANSI/ISEA 121-2018 standard with all required labeling.</p>

Ideal for those tethering tools in construction, telecommunications, oil and gas, power generation, utilities, wind energy, manufacturing or other jobsites where dropped objects are a risk.</p>

This tool attachment is compatible with screwdrivers or nut drivers with handles ranging from 1in // 2.5cm to 1.28in // 3.2cm in diameter and a handle height of 4.5in // 11.4cm</p>

Klein Gated Bucket Hook

Safety Archives - Roofing

Ergodyne Squids 3790 Tool Shackle (2-Pack) - Stainless - S

The Arsenal 5710 Bucket Truck Tool Board is a multifunctional tool storage, organization and tethering solution designed for work in aerial buckets and other mobile elevated work platforms (MEWPs). With multiple grommets and 3 hook & loop straps, it can be securely hung from bucket hooks or affixed to railings—maximizing space in compact work areas by keeping gear up off the floor and out of the way.

Arsenal by Ergodyne 5710 Gray Bucket Truck Tool Board

Falling Objects Prevention // At-Heights Safety

2-Pk) Ergodyne Tool Grip Tether Attachment Black L 19747

Radio Free Tenacity

Anchor Strap Belt Loop Attachment for Tool Tethering

100% Polyester MEETS THE ANSI/ISEA 121 STANDARD - Third party certified to an 2lbs // 0.9kg maximum working capacity RETROFIT TOOL ATTACHMENT POINT

Ergodyne Squids 3785 Tool Tethering Split Ring Tool Attachment, 1 Diameter

Squids 3700 Nylon Webbing Tool Tails make it easy to retrofit smaller hand tools for tool-lanyard tethering. Heavy-duty nylon webbing is double-stitched with high-tensile-strength nylon thread to ensure reliable performance in even the harshest work environments. A corrosion-resistant, stainless-steel D-ring on one end accommodates tool-lanyard connections.

Ergodyne Squids 3700 Medium Orange Web Tool Tails - 2lb 6-Pack

Ergodyne Squids 3178 2 Locking Aerial Bucket Hook with Tethering Point

Ergodyne Squids 3745 Tool Grip and Tether Attachment Point (2-Pack) - Jendco Safety Supply

Ergodyne Squids 3785 Split Ring Tool Attachment (10-pack) - - 1.5 in (3.8 cm) - Jendco Safety Supply