Sublimation two tone inner/ handle color mug. NOTE: The recommended settings below may need adjustments for the best results. Settings will vary depending on the heat press brand and model ink and paper and atmospheric conditions. The substrate should be at room temperature Specification Mug Press: 385°F Time: 190 sec
Sublimation two tone inner/ handle color mug.
NOTE:
Product Name
|
Sublimation 11oz
|
Product Size
|
Height 17cm, Dia. 8.2cm
|
Packaging
|
Individually boxed |
Steps:
1. cut your transfers so that the transfer is slightly larger vertically than
the mug.
2. Position the substrate onto the transfer.
3. Tape two ends of the transfer allowing for the gap in the mug press where it will close.
4. Wrap a piece of scratch paper around the transfer and mug taping if necessary.
5. Center the transfer and mug in the mug press.
6. Close the mug press using the heat press settings above.
7. Remove items from the press immediately. Use heat resistant gloves if necessary - the items will be very hot.
8. Remove transfer and scratch paper.
Tips:
- If the image of the final product appears light increase the pressure or
the time slightly (10-15 seconds).
- If the image on the final product appears blurred or substrate appears yellowed or has brown spots on the rim of the top or bottom of the mug reduce the time slightly (10-15 seconds).
- Too much pressure can cause trapped moisture in the paper to jet away pulling ink with it in a spiked-peaked formation. To avoid this reduce the pressure.
- Take care when applying pressure as too much press can cause the tumbler to bend slightly which will prevent the lid from fitting properly.
IN A CONVECTION OVEN:
Note: Because not all ovens are created equally the time in an oven can
range from 6 to 9 minutes. Convection oven is recommended.Settings will vary depending on the oven brand and model ink and paper and atmospheric
conditions.
2nd Note: Be sure that the artwork does not go beyond the size limits of the
wrap.
Oven settings:
- temperature - 405 degrees F
- dwell time - 6.5 to 8.5 minutes
- pressure - light to medium
STEPS:
1. Position transfer onto the substrate using heat tape to secure the transfer to the substrate.
2.. Use the shrink sleeve
itself.
3. Pull from oven and remove wrap and paper. Caution contents will be hot use heat resistant gloves for safety.
Tips:
- If the image of the final product appears light increase the pressure or
the time slightly (30-45 seconds).
- If the image on the final product appears blurred or substrate appears
yellowed or has brown spots reduce the time slightly (30-45 seconds).
Customized Bright Two-Tone Sublimation Mugs (11 Oz.)
White Ceramic Sublimation Coffee Mug
Craft Express 6-Pack 11oz. Contrast Red Handle Sub
HomeVss Ceramic 11oz Sublimation Coffee Mug Packed in
Two Tone Sublimation Mugs: Discover Vivid Contrast in Our
Blue Two-Tone Ceramic Sublimation Coffee Mug 11oz
11 oz. Bright Two-Tone Sublimation Custom Mugs
White Ceramic Sublimation Coffee Mug
HomeVss Ceramic 11oz Sublimation Coffee Mug
Durable Stoneware Material, Commercial Grade, Fine quality sublimation for printing Suitable for Oven, Microwave and Dishwasher Safe, can take from
HomeVss 11oz White Ceramic Sublimation Coffee Mug With Solid Colors Inside and Handle Black, Red, Pink, Blue, Green and Yellow - 6 Assorted Color
Sublimation 11 oz ceramic two tone color contrast coffee mug – We
HomeVss 11oz White Ceramic Sublimation Coffee
Sublimation 11 oz ceramic two tone color contrast coffee mug – We
Sublimation mugs are made of high-quality ceramics, and the surface is sprayed with a double-layer 3A coating, which is very suitable for thermal transfer. You can use mug press to print any pattern, text or logo you want on it. 11 oz white sublimation blank mugs,each 1 pieces with white single box packing, 36 pieces packing with one big brown carton.
MYSUB Sublimation Mugs, Cups 11oz Sublimation Ceramic Blank Coffee Mugs,White Cups, Sulimation Blanks, Blank White Mugs-36 Pack Bulk Bundle (36pc
12pcs Sublimation Coffee Mugs Blanks, 11oz Two Tone Color, 12